Title: SKY FK-9806 Smart Home Magnetic Sensor Alarm 2 Magnetic Sensor 1 Remote Control
Brand: SKY Model: FK-9806B2 Color: Black
Specifications of Magnetic sensor
Voltage: 3V Power: AAA*2pcs(not Included) Stand-by Volume: 100μA
Alarm volume: 30mA Frequency: 433MHZ Alarm response time: 200ms
Magnetic Sensor Size: 8.5*4.2*1.7cm Magnetic Strip Size: 4.5*1*1.4cm Stand-by time: 8-12 months(related with the type and quality of the battery)
Specifications of Remote control
Voltage: 12 Power: 12V27A*1(not Included) Stand-by Volume: 1μA
Working volume: 15MA Remote control distance: 20 meters Remote Control Size: 6*3*1.1cm
Stand-by time: 8-24 months (related with the type and quality of the battery)
*1. Anti-theft alarm function
*2. Entrance remind function
*1. One Magnetic Sensor can match with at most 8 remote controllers freely.
*2. One remote controller could control several magnetic sensors. This one include 2 Magnetic Sensor and 1 Remote Control
*3. Excellent Home use product，Tiny and fashion
*4. Volume: 110DB
*5. Alarm and door bell function for your option
*6. Low energy and long work time; Simple install
*1. When firstly use the smart home security magnetic alarm, open the cover the battery chamber, press the remote control’s leaning code button. Meanwhile, assemble 2pcs AAA batteries on the battery chamber. There will be one Bi...sound when the alarm is open. Then there will be two Bi...Bi...sounds when code pairing is successful. Then the remote control can control the magnetic alarm.
*1. select the installation place, pear off the cover of the double faced adhesive tape, and stick the magnetic alarm. Magnetic stripe arrow must be aligned with magnetic alarm. Details refer to the user manual
Instruction of Remote Control
*1. Four buttons on the remote control, from top to bottom, there are Alarm, Disarm, Emergent alarm button and Doorbell button/ Learning code button
*2. Alarm function: press the arm button, the magnetic alarm sound BI BI BI three times to confirm alarm. Then it will BI one time after 5 seconds and enters into the alarm state of alert. When someone levers your doors or windows, the magnetic alarm sounds harshly to drive away the intruders and remind the master.
*3. Disarm button: press the disarm button, the magnetic alarm will sound BI one time and goes into disarm status.
*4. Emergent alarm button: when press the emergent alarm button, the magnetic alarm will alarm in any model
*5. Doorbell button/ Learning code button: when press the doorbell button, the magnetic alarm sound Ding Dong. And the magnetic alarm will get out off the doorbell model when presses disarm or emergent alarm urgent button.
*6. 4. Increase remote controls: disassemble the battery of the magnetic alarm, and continually press the learning code button. Assemble the battery, and the magnetic alarm will sound BI one time to indicate that the alarm is open. And the magnetic alarm will sound Bi...BI...two times in 5 seconds the remote control is added successfully. ( notes: one magnetic alarm can be matched with 8 remote control at most)
*7. Add magnetic alarm: continually press the remote control’s learning code button, and assemble the new magnetic alarm’s battery. When the magnetic alarm sounds BI one time, the alarm is open. Then the magnetic alarm sound BI...BI two times in 5 seconds, It indicates that the magnetic alarm is added successfully. (One remote control can control 100pcs magnetic alarms.)
*1. Please make sure the arrow of the magnetic align the Magnetic Stick, magnetic stick stripe on the right side of the magnetic sensor, when the door is closed, the distance between magnetic sensor and magnetic stick should less than10 mm.
*2. Only use in indoor, banned in outdoor use.
*3. Working environment temperature: -10 ~ 60 ° C
*4. Working environment humidity: < 80%
*5. Storage temperature: -20 ° C - + 70 ° C
Low pressure detection
*1. When the battery is low, the LED of magnetic door will flashing once per second, prompt low, please replace the battery.
*2. Remote control lights flashing dimmed or remote distance becomes shorter, please replace the battery.
2x Magnetic Sensor
2x Magnetic Stick
1x Remote Control
1x User Manual