1. Please construct in the place where there is no direct sunshine during the day. It's better to go to a professional beauty shop for construction.
2. It is suggested to wipe from high to low to ensure that the parts coated with crystalline coatings are kept dry.
3. When using crystal plating, please wipe straight and change horizontally to ensure uniform application.
4. It is not recommended to wipe the car body with cloth because the plating solution has begun to crystallize and solidify after more than 8 minutes.
5. Don't touch water within 24 hours after crystal plating, don't drive within 1 day, don't rub the surface within 3 days, and don't wash the car within 7 days.
6. The cap of the bottle must be sealed after the use of the commodity. The residual crystal plating solution solidified after the volatilization of the surface solvent and could not continue to be used.
7. Place the goods in a cool place to avoid deterioration.
8. Although the hardness of the product is 6H, the glass film formed by crystallization is very thick, and the protective ability is limited when it is damaged and impacted by strong force.
Strong hydrophobicity, so that the surface is super smooth, whether water or sewage are not residual, the wind can remove the remaining droplets.
Crystallization protective film with 9H hardness is formed on the surface, which can effectively prevent all kinds of ugly marks.
The product has stable high melting point and strong protection from high temperature exposure.
Protect automotive surface paint from contact with the outside world and from acid rain or other corrosion of automotive paint.
The method is simple and effortless, and the process of crystallization can be completed in only a few steps, which is suitable for anyone to use.
[Method of Use]
1. Choose a place where there is no sun to shine and clean the vehicle. (If there is waxing, please remove the wax gum first, choose degreasing and dewaxing agent to remove it.)
2. Cover the sponge with the attached cloth and drop 3-5 drops of crystal plating solution.
3. Apply partition blocks to vehicles to ensure uniform distribution and effective crystallization.
4. Wait 5 minutes, the activator will start to volatilize, and finally wipe the lines with cloth.